Home › Archive for cracked chimney

cracked chimney

Sealing A Brick House

Posted on by

If you own a brick house, then you’re well aware of the dangers of moisture damage to brick. If you don’t own a brick house but are thinking about purchasing one, it’s important that you understand this durable material. The biggest enemy to any form of masonry is moisture. Bricks are porous, and as such, they are prone to absorbing water and cracking or crumbling. The same goes for mortar. 

One of the best ways to protect your brick house from moisture damage is by sealing it. Sealing a brick house can help prevent any issues that you may have with water damage for a period of time. Learn all about sealing a brick house here!

Step 1: Inspect the House

If you’re considering sealing your house, you’ll need to inspect it to make sure that sealing it is suitable. Then, you’ll need to prep it for sealing. When inspecting the home, look for the following issues that may be present:

  • Mold or mildew buildup
  • Crumbling or cracking in the bricks or mortar
  • Salt lines from flooding
  • Creeping plants, like ivy
  • Areas with heavy dirt or mineral deposits
  • Old paint

If you notice that your brick and mortar are heavily damaged, either through cracking or crumbling, sealing your house may not be the first thing you should do. The house may need to be tuckpointed, or repaired further. If so, give us a call. If your home seems to be in good condition, then you’ll be ready to prep it.

Step 2: Prep the Brick

Preparing the brick is an important step. As bricks are porous, it can be assumed that they’ll absorb things like moisture and dirt over time. They may also have residual sealant in them if they’ve been sealed before. As such, it’s important to wash them and prepare them for sealing. To wash the brick, follow the steps below:

  1. Remove any dirt, debris, or old paint from the surface gently
  2. Pull back any debris from the bottom layers of brick
  3. Apply a mildew and mold remover using a scrub brush
  4. Power wash the brick from top to bottom, making sure to wash away any dirty water
  5. Allow the brick to dry completely

Once you’ve finished prepping the brick, it’s time to get the workspace ready.

Step 3: Protecting Surfaces and Yourself

Treat your house as if you’re painting it. That means covering things surrounding the house with drop cloths, taping off windows and doors, and wearing eye protection, a mask, and rubber gloves. If you’ve done all that, then you’re ready to seal.

Step 4: Seal the Brick

You can use a pump sprayer or the traditional method of a roller to apply brick sealant. Regardless, make sure that you coat the surfaces evenly, and allow them to dry completely. Temperatures need to be between 40 and 90 degrees fahrenheit for proper application, and the sealer needs to be allowed to dry without weather interference.

Key Takeaways

Sealing brick is a great way to keep your home in great shape for years to come. However, not all homes are ready to be sealed. If the masonry surfaces of your home need repair, be sure to give us a call. We can help you get your brick tuckpointed, and get it in the best shape before being sealed!

Should I Paint My Exposed Brick Walls?

Posted on by

One of the most timeless looks in any home is an exposed brick wall. It shows the craftsmanship that went into the home, and adds great texture to any room. What’s more is that true exposed brick walls are a conversation starter. Not many people’s homes have legitimate exposed brick in them these days – construction methods have changed, and so have the qualities of brick. As such, an old brick wall in the home looks good.

However, a big trend in interior design as of late is painting these beautiful walls. Sure, there are some benefits to this, but should an exposed brick wall be painted? While it’s entirely up to the owner, of course, there are some things that you should consider before painting your exposed brick. Take a look at what we have to say about it.

The Case for Leaving Exposed Brick Exposed

While painted brick walls are trendy and in style, they aren’t the smartest decision to make when it comes to the well-being of your home, or the brick that’s in it. Here are some great reasons as to why your interior exposed brick should remain unpainted.

Paint is Moist, Moisture Means Damage

While there are paints that are made specifically for painting masonry, most payments don’t take into consideration the issues that brick will have with moisture. When exposed to constant moisture, brick is prone to cracking and crumbling. Paint is, in fact, moist. When you paint a brick wall, you run the risk of causing serious damage to it.

Painted Brick Can’t Be Undone

When you paint a surface, it isn’t always permanent. In most cases, you can remove the paint with some sandpaper and some elbow grease. When you paint brick, you can’t go back. Paint on brick is a permanent solution, as the removal of the paint will damage the brick. If you want to change the look of your painted brick, you’ll have to choose a different paint color, because removing the paint will do irreparable damage to the masonry nine times out of ten.

It’s A Lot of Work

Painting brick in the first place requires a lot of work. Prepping and priming brick for painting takes more effort than pretty much any other surface, and it can’t be rushed. Sealing the brick is the first step in this process, and if overlooked, the brick will suffer. Then, before being able to paint, a specific masonry primer will need to be applied as well. Then, the upkeep with the painted brick will be an effort, as well. It’s entirely likely that even when proper steps are taken, the brick will suffer water damage.

Key Takeaways

Should exposed brick walls be painted? We don’t think so. However, if you’re considering going the route of painting your brick, don’t hesitate to give us a call. We’ll go over the process in detail with you, and we’ll be able to come take a look before you paint. That way you’ll know if your brick is up to it or not.

Fireplace Restoration

Posted on by

Everybody loves a warm, crackling fire in an old fireplace on a cold night.  But an aging and worn-out fireplace is not only an eyesore, but it can also be a dangerous fire hazard and potentially deadly.  

Common Problems

Cracked Chimney Liner―Today’s chimneys usually have liners made of steel but older ones can have clay or ceramic chimney liners that can become cracked and damaged over time.

Creosote Build-up―Creosote is the nasty residue that’s left behind in your flue when you burn fossil fuels.  When it builds up, it is extremely dangerous because it can ignite from the heat and cause a chimney fire.  Over time, the build-up causes your flue to essentially be smaller and smaller until airflow because compromised and restricted.  This means that while some air goes up through your chimney, what can’t flow easily up and out will come back down into your home and bring with it deadly carbon monoxide.  

Damaged Brickwork―Bricks are extremely durable and may last hundreds of years but mortar does not.  Crumbling mortar can be repaired without removing the entire fireplace or chimney but if it is left unnoticed and in disrepair, it could potentially lead to a collapse.  

Obstruction―If you’re experiencing smoke backing up into your home, it could be because of something as simple as a bird’s nest or something else that made its way into your chimney, but this simple problem could be deadly because it could cause carbon monoxide poisoning or fire.  

Damper Stuck Closed―Sometimes people may not realize that the damper has been closed and is causing smoke to come in but dampers can also get stuck in the closed position due to rust or damage which means smoke won’t go up and out the chimney.

Fireplace Restoration

In most cases, fireplaces can be restored without having to do a complete and expensive tear-down and replacement of the fireplace and chimney.  

A cracked flue can usually be fixed easily by inserting a steel chimney liner in the old flue.  If the restoration includes brickwork, your fireplace or chimney may be restored with a process called tuckpointing.  

Tuckpointing is a process that involves removing the old, deteriorating mortar and replacing it with a mortar that is similar in color to the brick.  Then mortar that is closer in color to the existing mortar is applied, giving the brickwork a straight, even line.  Tuckpointing is strong, water-resistant, and can extend the life of the fireplace or chimney.  It is a corrective and preventative procedure that can save a lot of money over replacement and have you enjoying a cozy fire again in no time. 

Marlon Tuckpointing provides tuckpointing and masonry services to the St. Louis area including complete and spot tuckpointing services as well as chimney repairs, caulking, waterproofing, brickwork, and repairs to chimney caps and flashing. We pride ourselves on the high quality of our work and the satisfaction of all our clients.  For questions or a free estimate call Marlon Tuckpointing LLC at (314) 496-9067 or visit our website and see some of the beautiful restorations we’ve done using tuckpointing.