Home › Archive for loose masonry

loose masonry

Should I Paint My Exposed Brick Walls?

Posted on by

One of the most timeless looks in any home is an exposed brick wall. It shows the craftsmanship that went into the home, and adds great texture to any room. What’s more is that true exposed brick walls are a conversation starter. Not many people’s homes have legitimate exposed brick in them these days – construction methods have changed, and so have the qualities of brick. As such, an old brick wall in the home looks good.

However, a big trend in interior design as of late is painting these beautiful walls. Sure, there are some benefits to this, but should an exposed brick wall be painted? While it’s entirely up to the owner, of course, there are some things that you should consider before painting your exposed brick. Take a look at what we have to say about it.

The Case for Leaving Exposed Brick Exposed

While painted brick walls are trendy and in style, they aren’t the smartest decision to make when it comes to the well-being of your home, or the brick that’s in it. Here are some great reasons as to why your interior exposed brick should remain unpainted.

Paint is Moist, Moisture Means Damage

While there are paints that are made specifically for painting masonry, most payments don’t take into consideration the issues that brick will have with moisture. When exposed to constant moisture, brick is prone to cracking and crumbling. Paint is, in fact, moist. When you paint a brick wall, you run the risk of causing serious damage to it.

Painted Brick Can’t Be Undone

When you paint a surface, it isn’t always permanent. In most cases, you can remove the paint with some sandpaper and some elbow grease. When you paint brick, you can’t go back. Paint on brick is a permanent solution, as the removal of the paint will damage the brick. If you want to change the look of your painted brick, you’ll have to choose a different paint color, because removing the paint will do irreparable damage to the masonry nine times out of ten.

It’s A Lot of Work

Painting brick in the first place requires a lot of work. Prepping and priming brick for painting takes more effort than pretty much any other surface, and it can’t be rushed. Sealing the brick is the first step in this process, and if overlooked, the brick will suffer. Then, before being able to paint, a specific masonry primer will need to be applied as well. Then, the upkeep with the painted brick will be an effort, as well. It’s entirely likely that even when proper steps are taken, the brick will suffer water damage.

Key Takeaways

Should exposed brick walls be painted? We don’t think so. However, if you’re considering going the route of painting your brick, don’t hesitate to give us a call. We’ll go over the process in detail with you, and we’ll be able to come take a look before you paint. That way you’ll know if your brick is up to it or not.

Fireplace Restoration

Posted on by

Everybody loves a warm, crackling fire in an old fireplace on a cold night.  But an aging and worn-out fireplace is not only an eyesore, but it can also be a dangerous fire hazard and potentially deadly.  

Common Problems

Cracked Chimney Liner―Today’s chimneys usually have liners made of steel but older ones can have clay or ceramic chimney liners that can become cracked and damaged over time.

Creosote Build-up―Creosote is the nasty residue that’s left behind in your flue when you burn fossil fuels.  When it builds up, it is extremely dangerous because it can ignite from the heat and cause a chimney fire.  Over time, the build-up causes your flue to essentially be smaller and smaller until airflow because compromised and restricted.  This means that while some air goes up through your chimney, what can’t flow easily up and out will come back down into your home and bring with it deadly carbon monoxide.  

Damaged Brickwork―Bricks are extremely durable and may last hundreds of years but mortar does not.  Crumbling mortar can be repaired without removing the entire fireplace or chimney but if it is left unnoticed and in disrepair, it could potentially lead to a collapse.  

Obstruction―If you’re experiencing smoke backing up into your home, it could be because of something as simple as a bird’s nest or something else that made its way into your chimney, but this simple problem could be deadly because it could cause carbon monoxide poisoning or fire.  

Damper Stuck Closed―Sometimes people may not realize that the damper has been closed and is causing smoke to come in but dampers can also get stuck in the closed position due to rust or damage which means smoke won’t go up and out the chimney.

Fireplace Restoration

In most cases, fireplaces can be restored without having to do a complete and expensive tear-down and replacement of the fireplace and chimney.  

A cracked flue can usually be fixed easily by inserting a steel chimney liner in the old flue.  If the restoration includes brickwork, your fireplace or chimney may be restored with a process called tuckpointing.  

Tuckpointing is a process that involves removing the old, deteriorating mortar and replacing it with a mortar that is similar in color to the brick.  Then mortar that is closer in color to the existing mortar is applied, giving the brickwork a straight, even line.  Tuckpointing is strong, water-resistant, and can extend the life of the fireplace or chimney.  It is a corrective and preventative procedure that can save a lot of money over replacement and have you enjoying a cozy fire again in no time. 

Marlon Tuckpointing provides tuckpointing and masonry services to the St. Louis area including complete and spot tuckpointing services as well as chimney repairs, caulking, waterproofing, brickwork, and repairs to chimney caps and flashing. We pride ourselves on the high quality of our work and the satisfaction of all our clients.  For questions or a free estimate call Marlon Tuckpointing LLC at (314) 496-9067 or visit our website and see some of the beautiful restorations we’ve done using tuckpointing. 

Tuckpointing 101: 5 essential things you need to know

Posted on by


Masonry items, such as block, stone, or brick, can last up to 100 years with virtually no maintenance. However, the mortar joints can present damage if these are exposed to harsh weather conditions –even if the bricks are in excellent shape. If the mortar shows cracks or detriment due to water exposure, it needs to be repaired. The most common and efficient way to do it is by Tuckpointing. If you’re not familiar with the term, don’t worry. Here’s a crash course:

1.      What is Tuckpointing?

It is a technique used to repair mortar joints in stone or bricks and to enhance the appearance of masonry. The process consists of grinding the deteriorated mortar and filling in with new material. The new mortar must match the color of the bricks; then, a thin line of putty is applied in the center of the joint. This layer has a contrasting color against the bricks. The technique gives the impression of well-maintained, delicate, and narrow joints made. 

2.      When should you Tuckpoint?

Here’s a simple test you can do. Take a regular key and stroke the mortar joint. If the masonry is in good shape, the rubbing will not scratch it at all. But, if the scratching releases powdered material, then you need to repair it. You can either perform this basic test or call an expert for a more professional evaluation. Remember, tuckpointing is also used for cosmetic purposes. It is used widely on historic brick homes; the technique helps recapture the home’s original appearance. 

3.      What happens if I don’t Tuckpoint?

When the technique is appropriately applied, the mortar joints become relatively waterproof. It increases the life of your walls. On the contrary, weakened or deteriorated mortar allows moisture and humidity to infiltrate the brick or stone masonry. If the moisture gets behind the wall, the problem will be much severe. In the worst cases, the only fix will be to tear the wall down. By not tuckpointing on time, you will lose time and money. 

4.      Is there a point where it is too late to Tuckpoint?

Unfortunately, yes. Loose masonry units –stone or bricks –mean bad news. If your situation gets to this point, the only way to fix it is to pull down the masonry wall and build it again. In terms of money, there is no comparison between doing this final solution and Tuckpointing on time. 

5.      Can I prevent mortar deterioration?

The lifespan of mortar joints is around 30 years. The wear and tear obey to different causes. We mentioned moisture but also erosion from exposure to extreme temperatures, low-quality craft, or even pressure from the weight of the masonry. Mortar joints are the weakest part of a wall; inevitably, you will eventually have to maintain and repair. 

Although labor-extensive, Tuckpointing is an efficient, effective, cost-worthy technique to keep your masonry walls and chimneys in optimal condition.